Aspen Hysys - Basic Process Modeling

[LeeAndro]

Last updated 8/2019MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHzLanguage: English | Size: 1.68 GB | Duration: 4h 51m

Learn how to model basic Industrial and Chal Processes!​

What you'll learn
Model basic chal processes
Simulate basic industrial processes
Understand the concept of Flowsheet and Manipulate it
Set up the required/basic inputs for a Simulation
Choose the most adequate Method for Physical Properties Modeling
Be able to model the most important/used Unit Operations
Modify all reporting results in order to make analysis
Requirements
Chal Eeering Basics
Elementary Principles of Plant Operation/Design (Recommended)
Aspen HYSYS (Version 7 at least)
Description
The BASIC Aspen HYSYS Course will show you how to model and simulate Processes (From Petrochal, to Ammonia Synthesis and Polymerisation).
Analysis of Unit Operation will help you in order to optimise the Chal Plant.
This is helpful for students, teachers, eeers and researchers in the area of R&D and Plant Design/Operation.
The course is didactic, with a lot of applied theory and Workshops/Study cases.
At the end of the course you will be able to setup a simulation, run it, get results and more important, analysis of the process for further optimisation.

Overview

Section 1: Introduction to Process Modeling!

Lecture 1 Welcome to the Course!

Lecture 2 Why Process Modeling/Simulation

Lecture 3 Join the Aspen Plus & HYSYS Forum (Unofficial)

Section 2: Course Objectives

Lecture 4 Content (Index)

Lecture 5 Course Objectives

Section 3: Introduction to Aspen HYSYS

Lecture 6 About Aspen HYSYS and its Versions

Section 4: User Interface & Getting Help

Lecture 7 Introduction to HYSYS Graphical User Interface

Lecture 8 Starting Page - New, Open, Extensions, Templates Overview

Lecture 9 HYSYS - Landing Page

Lecture 10 Introduction to the Environments

Lecture 11 HYSYS - Environment Overview

Lecture 12 Getting Help

Lecture 13 HYSYS - Getting Help

Section 5: Environment I: Physical Properties

Lecture 14 Introduction to the Physical Property Environment

Lecture 15 Physical Properties Requirements

Lecture 16 The Fluid Package

Lecture 17 HYSYS - Filling up the Physcal Property Environment

Section 6: Environment II: Introduction to Flowsheet

Lecture 18 Introduction to the Simulation environment & Flowsheet

Lecture 19 Interacting with the Simulation Environment

Lecture 20 HYSYS - Filling up the Simulation Environment

Lecture 21 Basic Results and Conclusion

Lecture 22 HYSYS - Basic Results and Tables

Section 7: Basic - Unit Operation Models

Lecture 23 Introduction to the Unit Operation Section

Lecture 24 Introduction to Unit Operations

Lecture 25 HYSYS - Unit Operations

Lecture 26 Mixers & Tees

Lecture 27 Exercise: Mixers & Tees

Lecture 28 Heat Exchange

Lecture 29 Exercise: Heaters and Collers

Lecture 30 Separator (Flash)

Lecture 31 Exercise: Separator (Flash)

Lecture 32 Columns

Lecture 33 Exercise: Distillation Column

Lecture 34 Hydraulics - Pump

Lecture 35 Exercise: Pump

Lecture 36 Hydraulics - Compressor

Lecture 37 Exercise: Compressor

Lecture 38 Reactors

Lecture 39 Exercise: Conversion Reactor

Lecture 40 Unit Operations Closure

Section 8: Basic Reporting of Data and Results

Lecture 41 Introduction to the Results & Reporting Section

Lecture 42 Basic Reporting

Lecture 43 HYSYS - The Workbook

Lecture 44 HYSYS - Exporting Data to Excel

Lecture 45 HYSYS - Creating Reports

Section 9: Worked Case Studies (I, II and III)

Lecture 46 Introduction to the Case Studies

Lecture 47 Case Study I - Statement

Lecture 48 Case Study I: Simulation

Lecture 49 Case Study I: Results and Conclusion

Lecture 50 Case Study II: Statement

Lecture 51 Case Study II: Simulation

Lecture 52 Case Study II: Results and Conclusion

Lecture 53 Case Study III: Statement

Lecture 54 Case Study III: Simulation

Lecture 55 Case Study III: Results and Conclusion

Lecture 56 Case Studies Closure

Section 10: Individual Case Study

Lecture 57 Introduction to the Individual Case Study

Lecture 58 Case Study IV: Overview & Results

Section 11: 10. Course Conclusion

Lecture 59 Course Wrap-up

Lecture 60 Continue with your Aspen Tech Education

Section 12: Bonus & Surprises!

Lecture 61 Bonus!

Lecture 62 More Courses!

Chal Eeers,Process Eeers,Students related to eeering fields,Teachers willing to learn more about process simulation,Petrochal Eeers

HomePage:

Https://anonymz.com/https://www.udemy.com/course/aspen-hysys-basic-process-modeling/

DOWNLOAD

https://1dl.net/0w175jclreuu/U0iIP1dd__Aspen_HYSY.part1.rar.html
https://1dl.net/jryqx4wiqdgv/U0iIP1dd__Aspen_HYSY.part2.rar.html