Cooling Load Estimation Using Hap 5.1

[LeeAndro]

Published 9/2022MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHzLanguage: English | Size: 4.07 GB | Duration: 4h 25m

Build a good knowledge of accurate estimation of cooling load , Form the principles to creating a complete project

What you'll learn
The importance of accurate Load Estimation
The Main Load Components (External/Internal/System).​

The Difference between Zone, Space and System.
Principles of heat transfer.
How to read the Psychometric Chart
Introduction to HAP 5.1 Program
How to choose the weather conditions.
How to build the project libraries
How to create the spaces and define the different loads.
Introduction to HVAC systems(DX & Chilled water) .
Different types of DX Systems (Split units, Package Units, VRF ,.).
The main components of Chilled Water Systems (Chiller ,cooling tower ,Pumps, AHU,FCU ).
How to create the different types of systems on HAP Program.
How to create Chiller plant on HAP Program.
How to generate reports from HAP program.
Requirements
No pervious requirements
Description
Hello Every one ,The importance of accurate cooling load calculation is very essential to make a good HVAC design ,choosing the right systems ,suitable selection of different equipment and even for building energy consumption after stating , we will start this course by learning the fundamental of cooling load , the used units , different types of loads and we will study the importance of psychrometric chart learning the different parameters and process of air .We will also emphasize on using Hourly analysis program HAP 5.1 the latest version of carrier program , we will learn how to define the weather , Project libraries , Space properties , System Properties ,Plant properties and how to generate the different types of reports and how to read this reports . Choosing the suitable system is very important , so we will learn the different types of Dx-Systems , chilled water system ,why we use refrant , the main components of Vapor compression cycle , the different types of chillers , air cooled vs water cooled , absorption chillers , cooling tower components , Pumps , and different types of teal coils (Fan Coil Unit & Air handling Unit ).objectives :1. The importance of accurate Load Estimation.2. The Main Load Components (External/Internal/System).3. The Difference between Zone, Space and System.4. Principles of heat transfer.5. How to read the Psychometric Chart.6. Introduction to HAP Program.7. How to choose the weather conditions.8. How to build the project libraries.9. How to create the spaces and define the different loads.10. Introduction to HVAC systems (DX & Chilled water) .11. Different types of DX Systems (Split units, Package Units, VRF ,.).12. The main components of Chilled Water Systems (Chiller ,cooling tower ,Pumps, AHU,FCU ).13. How to create the different types of systems on HAP Program.14. How to create Chiller plant on HAP Program.15. How to generate reports from HAP program.

Overview

Section 1: Introduction

Lecture 1 Introduction to Cooling Load

Lecture 2 Zone, Space and System

Lecture 3 Load Estimation Methods

Lecture 4 Principles of heat transfer

Lecture 5 Measuring Heat Quantities

Lecture 6 Sensible Load Vs Latent Load

Section 2: Psychometric Chart

Lecture 7 Introduction to Psychometric Chart

Lecture 8 Properties of Air

Lecture 9 Process on Psychometric Chart

Section 3: Weather Conditions

Lecture 10 Introduction to HAP 5.1 Program

Lecture 11 Location and Design Temperatures

Lecture 12 Clearance , Reflectance and soil conductivity

Lecture 13 Appling on HAP 5.1

Lecture 14 ASHRAE Meteo

Section 4: Project Libraries

Lecture 15 Schedules

Lecture 16 Walls And Roofs

Lecture 17 Windows and Doors

Lecture 18 Shading

Section 5: Define Space Properties

Lecture 19 Space Properties - General

Lecture 20 Space Properties - Internals

Lecture 21 Space Properties - Walls and Roofs

Lecture 22 Space Properties - Infiltration, Floors and Partitions

Lecture 23 Space Properties - Reports and Operations

Section 6: Appling On Project

Lecture 24 Reviewing the project

Lecture 25 Starting A new project, Weather and Project Libraries

Lecture 26 Arch. Drawings preparation

Lecture 27 Define First Floor Spaces

Lecture 28 Define Ground Floor Spaces

Section 7: Introduction to systems

Lecture 29 Refration Cycle

Lecture 30 Introduction to DX-Systems

Lecture 31 DX-Systems on HAP 5.1

Lecture 32 Chilled Water System & Chillers

Lecture 33 Cooling Tower And Pumps

Lecture 34 Air Teal Units

Lecture 35 Create FCU System on HAP 5.1

Lecture 36 Create AHU System on HAP 5.1 - General

Lecture 37 Create AHU System on HAP 5.1 - System Components

Lecture 38 Create AHU System on HAP 5.1 - Zone and Sizing Data

Lecture 39 Different HAP Reports

Lecture 40 Plant Properties on HAP 5.1

Section 8: Appling On project

Lecture 41 Appling On project

HVAC Design Eeers,Faculty of Eeering Students - Mechanical Department

HomePage:

Https://anonymz.com/https://www.udemy.com/course/cooling-load-estimation-using-hap-51/

DOWNLOAD

https://1dl.net/30q34kq013bj/VyATFu2F__Cooling_Lo.part1.rar.html
https://1dl.net/u879snmgaf2n/VyATFu2F__Cooling_Lo.part2.rar.html
https://1dl.net/gy5vfarb7yvq/VyATFu2F__Cooling_Lo.part3.rar.html
https://1dl.net/w2wne4dr1tq5/VyATFu2F__Cooling_Lo.part4.rar.html
https://1dl.net/xq53v73u15g3/VyATFu2F__Cooling_Lo.part5.rar.html