Pipe Sizing In Process Plants

[LeeAndro]

Last updated 8/2022MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHzLanguage: English | Size: 657.20 MB | Duration: 1h 6m

Understand how to choose the suitable line size for a fluid based on the required criteria

What you'll learn
Learn how to calculate the main parameters used for pipe sizing for liquid, gas and two phase flow
Know the common velocity criteria used for judging a pipe size for different fluid services
Know the common pressure drop criteria used for judging a pipe size for different fluid services
See how two phase flow regimes affect the pipe
See some examples of choosing the suitable pipe size and how the chosen criteria affects the pipe diameter
Requirements
Basics of fluid mechanics
Description
Pipe sizing is one of the first major activities a process eeer carries out during the preparation of the P&ID.​

Pipe size is an important factor for a well-designed process. It shall affect fluid velocity, pressure drop, flow regime,.etc.A poorly sized pipe can cause disturbance to the whole process and may lead to plant shutdown in critical cases.Pipe size also has a lot to do with cost, oversizing a pipe means extra cost, more complex pipe design, more foundation, even somes process issues.In this course, you'll learn how to choose the correct pipe size that works with the corresponding fluid service and compare it with velocity, pressure drop, and two-phase flow regime criteria.Through this course, you'll see how to calculate the velocity and pressure drop of a fluid in the pipe. Then after calculating the parameters, we'll see the expected criteria range for each service, so that we can compare them with our calculated parameters.We'll see also what are the two-phase flow regimes and how we should deal with them.Finally, I'll give some examples for pipe sizing and I'll give an Excel sheet that can guide you on how to size pipes in the future.

Overview

Section 1: Introduction

Lecture 1 Introduction

Lecture 2 Main Sizing Criteria

Section 2: Velocity Criteria

Lecture 3 Effect of velocity on a pipe

Lecture 4 Calculate velocity in a pipe

Lecture 5 Pipe sizing velocity criteria for liquids

Lecture 6 Velocity criteria for gases and two phase flow

Section 3: Sizing the pipe with respect to pressure drop

Lecture 7 Pressure Drop sizing approaches

Lecture 8 Calculate friction factor

Lecture 9 Calculating pressure drop for two phase flow

Lecture 10 Pressure drop criteria

Lecture 11 Hydraulic loops

Section 4: Two Phase Flow regimes

Lecture 12 Two phase flow regimes

Lecture 13 How to avoid or reduce slug flow

Section 5: Pipe Characteristics

Lecture 14 Detee pipe internal diameter against pipe schedule

Lecture 15 015-Consider fittings and calculate pipe equivalent length

Section 6: Let's start pipe sizing

Lecture 16 Tools to calculate pipe sizing

Lecture 17 Pipe sizing examples introduction

Lecture 18 Example 1- Condensate at pump discharge

Lecture 19 Example 2- LPG at pump suction

Lecture 20 Example 3- Gas at compressor suction

Lecture 21 Example 4- Two phase flow example

Section 7: Bonus Section

Lecture 22 Bonus Lecture

Eeers who want to understand the main basis for pipe sizing,Chal Eeering Graduates or undergraduates

HomePage:

Https://anonymz.com/https://www.udemy.com/course/pipe-sizing-in-process-plants/

DOWNLOAD

https://1dl.net/6sut5gj6o288/sLmBxR4o__Pipe_sizin.rar.html