Tekla Structure Project Warehouse Course

[ad-team]

2.27 GB | 15min 36s | mp4 | 1280X720 | 16:9
Genre:eLearning |Language:English

Files Included :
1 Introduction.mp4 (9.15 MB)
10 Create Stiffener plate.mp4 (29.35 MB)
11 Create Footing.mp4 (30.89 MB)
12 Create Purlin & Connection.mp4 (192.55 MB)
13 Create Post For Entry Location.mp4 (45.09 MB)
14 Create Base Plate For Post.mp4 (18.41 MB)
15 Create Pad Footing For Post.mp4 (9.03 MB)
16 Create Post Cape Plate Connection.mp4 (38.53 MB)
17 Create Beam End Plate Connection.mp4 (18.27 MB)
18 Create Side Cladding Girt.mp4 (75.43 MB)
19 Create Front & Rear Cladding Girt.mp4 (190.04 MB)
2 Create Grid.mp4 (22.75 MB)
20 Create Sheet for Roof.mp4 (121.66 MB)
21 Create Sheet for Front & Rear Side Cladding.mp4 (181.03 MB)
22 Create Sheet for RL Side Cladding.mp4 (71.32 MB)
23 Create Gable End Flashing.mp4 (174.96 MB)
24 Create Ridge Flashing.mp4 (91.02 MB)
25 Create Corner Flashing.mp4 (59.28 MB)
26 Create Rain Gutter For Middle.mp4 (95.33 MB)
27 Create Rain Gutter For End.mp4 (72.67 MB)
28 Create Drain Pipe or Downspout.mp4 (50.36 MB)
29 Clash Check.mp4 (34.87 MB)
3 Create Column.mp4 (13.77 MB)
30 Create Numbering.mp4 (18.22 MB)
31 Create Report.mp4 (25.39 MB)
32 Create GA Drawing.mp4 (157.1 MB)
33 Create Assembly Drawing.mp4 (87.04 MB)
34 Create Single Part Drawing.mp4 (32.2 MB)
35 Add Revision.mp4 (10.23 MB)
36 Print.mp4 (11.51 MB)
37 NC File Creation.mp4 (37.3 MB)
4 Create Rafter.mp4 (38.95 MB)
5 Create Rafter end connection (29).mp4 (42.09 MB)
6 Create Rafter Joining Plate connection (14).mp4 (54.22 MB)
7 Create Base Plate.mp4 (86.17 MB)
8 Create cap plate.mp4 (28.3 MB)
9 Create Crane support Beam.mp4 (53.96 MB)]
Screenshot

RapidGator

https://rapidgator.net/file/de81ebb92a6660d6b6ce14917936c533/
https://rapidgator.net/file/95a20b93eacd0df10f1571bcd299320a/

TurboBit

https://turbobit.net/bsp6kkd0h8ge.html
https://turbobit.net/yvdy4pcw1chv.html