Hot Tapping In Pipeline And Piping Industries - English

[LeeAndro]

Last updated 3/2018MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHzLanguage: English | Size: 330.99 MB | Duration: 1h 59m

Connecting a new Piping system to an existing one without interruption, Shutdown or Production loss

What you'll learn
will understand and gain solid knowledge about all aspects pertaining Hot tapping
will gain knowledge on Safety assessments and Hazard identification for Hot tapping
will to perform a feasibility study for Hot tapping
will be able to make a proper Hot tap designs
will understand welding sequences of Hot tap Fittings into Live Piping, Pipeline and equipment
Requirements
Your PC, Mobile or Tablet and headset
Simple knowledge about piping and Welding
Description
Hot tapping is the technique of attaching mechanical or welded branch fitting to pipeline, piping or equipment in service while while it is under pressure or has been depressurized but has not been cleared for conventional construction method.​

, and creating an opening in that pipeline, piping or equipment by drilling or cutting a portion of the pipeline, piping or equipment within the attached fitting.

Hot tapping is usually performed when it is not feasible, or it is impractical, to take the equipment, Pipeline or Piping out of service, or to purge or clean it by conventional methods.
The decision should only be made when
(1) continuity of service is essential,
(2) shutdown of the system is impractical,
(3) documented procedures are followed,
(4) special equipment is used which will provide effective protection for employees.
A hot tap connection can often be safely made without interfering with the process operation.

Hot-tapping is potentially hazardous and therefore should only by undertaken when shown to be technically feasible and to offer a clear advantage over alternatives.
This advantage may be economic and, in some situations, the safety and environmental risks may be less than those associated with more conventional methods.

Overview

Section 1: Module 1: Introduction

Lecture 1 MOD1_Lecture 1/5: Introduction

Lecture 2 MOD1_Lecture 2/5: Introduction - What is Hot tapping

Lecture 3 MOD1_Lecture 3/5: Introduction - Hot tapping Functions

Lecture 4 MOD1_Lecture 4/5: Introduction - Hot Tap Fittings

Lecture 5 MOD1_Lecture 5/5: Introduction - Hot tapping Machines , Cutter and Valves

Section 2: Module 2: Pre-Startup Activities

Lecture 6 Lecture 1/4: Hot tap Decision Making

Lecture 7 Lecture 2/4: Feasibility Study

Lecture 8 Lecture 3/4: Run Pipe/ Header Survey

Lecture 9 Lecture 4/4: Job safety Analysis

Section 3: Module 3: Eeering & Design

Lecture 10 MOD3_Lecture 1/7: Codes and Standards

Lecture 11 MOD3_Lecture 2/7: Welding Design - Welding Processes and Electrodes

Lecture 12 MOD3_Lecture 3/7: Welding Design - Welding Sequence

Lecture 13 MOD3_Lecture 4/7: Welding Design - Calculation

Lecture 14 MOD3_Lecture 5/7: Welding Design - Procedure Qualification (Mock Up)

Lecture 15 MOD3_Lecture 6/7: Hot tap Fitting Design - Area Replacement

Lecture 16 MOD3_Lecture 7/7: Hot tap Fitting Design - GA Drawings

Section 4: Module 4 : Job Execution

Lecture 17 MOD4_Lecture 1/5: Job Execution - On site Preparation

Lecture 18 MOD4_Lecture 2/5: Job Execution - On site Welding

Lecture 19 MOD4_Lecture 3/5: Job Execution - Testing of Welded Hot tap Fittings

Lecture 20 MOD4_Lecture 4/5: Job Execution - Leak Testing of Hot tap Machine

Lecture 21 MOD4_Lecture 5/5: Job Execution - Perforation and Handover

Professional Process, Piping, Pipeline, Inspection Eeers and Plant Operations,Fresh Graduated Eeers who want to be updated with Specialized eeering applications,Eeers who work in construction Field

HomePage:

Https://anonymz.com/https://www.udemy.com/course/hot-tapping-in-pipeline-and-piping-industries-english/

DOWNLOAD

https://1dl.net/dpfklmfioy5y/kOs3z38C__Hot_Tappin.rar.html