Let's try! Introduction to Fusion360 3DCAM Mill basics

[voska89]

Let's try! Introduction to Fusion360 3DCAM Mill basics by Minoru Ishii
English | 2022 | ISBN: N/A | ASIN: B0BJ3CB4WS | 150 pages | EPUB | 8.04 Mb
]

Created as an e-book for beginners who start 3DCAM with FUSION360.
The first introduces basic operations such as solid model creation, pocketing, contouring, and machining simulation.
It is created with the intention of using it and remembering it. Everyone, let's have fun learning and mastering 3DCAM!
CHAPTER1 Introduction
1.1 Features of Fusion360
1.2 Main features
1.3 About Toolpaths
1.4 About CAD/CAM linkage
1.5 Simulation function
1.6 Post-processor
1.7 Downloading Fusion360
1.8 Installation and setup
CHAPTER2 Basic operation
2.1 Open the sample model
2.2 How to use the middle button
2.3 Using the left button
2.4 Using the right button
2.5 Close the sample model
CHAPTER3 Create a model
3.1 Create a new document
3.2 Saving documents
3.3 Sketch
3.4 Create a boss
3.5 Create a pocket
CHAPTER4 Set up
4.1 Switching workspaces
4.2 Creating a setup
CHAPTER5 Pocketing
5.1 Selection of roughing tools
5.2 Shape selection
5.3 Setting the processing height
5.4 Path setting
5.5 Lamp settings
CHAPTER6 Contouring
6.1 Selection of finishing tools
6.2 Contour selection
6.3 Setting the processing height
6.4 Path setting
6.5 Lamp settings
CHAPTER7 Machining simulation
7.1 Perform machining simulation
7.2 Information
7.3 Statistics
CHAPTER8 NC program output
8.1 Post-processing
8.2 Displaying NC programs
8.3 Sample program
8.4 Processing instructions
CHAPTER9 Recalculation
9.1 Modification of shape
9.2 Updating machining paths
CHAPTER10 Example of use
10.1 Setup example
10.2 Processing example
10.3 Post Properties

Buy Premium From My Links To Get Resumable Support,Max Speed & Support Me

https://1dl.net/2ymlrsxpcu9t/gcys2.L.t.I.t.F.3.M.b.rar.html

Links are Interchangeable - No Password - Single Extraction