Most Complete Teaching Of Static Routing

[LeeAndro]

Last updated 7/2022MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHzLanguage: English | Size: 1.48 GB | Duration: 3h 34m

IPv4 & IPv6 Static Routing

What you'll learn
Static Routing - Three Methods of Configuration
Static Routing - Default Route
Static Routing - Load Balancing , Fault Tolerance
Static Routing - Host Route
Static Routing - Performance
IPv6 Static Routing - Four Methods of Configuration
IPv6 Static Routing - Default Route
Requirements
Cisco IOS Command Line Interface (CLI) knowledge , Routing Fundamentals
Description
Static routing is a form of routing that occurs when a router uses a manually-configured routing entry, rather than information from dynamic routing traffic.​

In many cases, static routes are manually configured by a network administrator by adding in entries into a routing table, though this may not always be the case. Unlike dynamic routing, static routes are fixed and do not change if the network is changed or reconfigured. Static routing and dynamic routing are not mutually exclusive. Both dynamic routing and static routing are usually used on a router to maximise routing efficiency and to provide backups in case dynamic routing information fails to be exchanged. Static routing can also be used in stub networks, or to provide a gateway of last resort.Static routing may have the following uses:Static routing can be used to define an exit point from a router when no other routes are available or necessary. This is called a default route.Static routing can be used for small networks that require only one or two routes. This is often more efficient since a link is not being wasted by exchag dynamic routing information.Static routing is often used as a complement to dynamic routing to provide a failsafe backup if a dynamic route is unavailable.Static routing is often used to help transfer routing information from one routing protocol to another (routing redistribution).

Overview

Section 1: Static Routing Fundamentals & Configuration

Lecture 1 Static Routing - Three Methods of Configuration - ArashDeljoo

Lecture 2 Static Routing - Default Route - ArashDeljoo

Lecture 3 Static Routing - Load Balancing , Fault Tolerance - ArashDeljoo

Lecture 4 Static Routing - Host Route - ArashDeljoo

Lecture 5 Static Routing - Performance - ArashDeljoo

Lecture 6 IPv6 Static Routing - Four Methods of Configuration - ArashDeljoo

Lecture 7 IPv6 Static Routing - Default Route - ArashDeljoo

Network Eeers

HomePage:

Https://anonymz.com/https://www.udemy.com/course/most-complete-teaching-of-static-routing/

DOWNLOAD

https://1dl.net/5v7p9bchf3lp/3F6YJUqF__Most_Compl.part1.rar.html
https://1dl.net/8y577kngh8ti/3F6YJUqF__Most_Compl.part2.rar.html