The Complete Bluetooth™/IoT Design Course for iOS

LeeAndro · May 24, 2022

Front-to-back design of iOS Bluetooth application and embedded ARM Cortex M3 micro-controller

Front-to-back (iOS-to-embedded) design process for Bluetooth/IoT solutions

How to design a Bluetooth enabled iOS application

How to implement custom UI controls with gesture support

How to implement Apple interoperability requirements for embedded Bluetooth micro-controllers

Programming an ARM Cortex-M3 embedded device

Programming in a real- OS (RTOS) environment

Designing a device driver from the data sheet up; control it from iOS

Programming a Direct Memory Access Controller (DMAC)

Programming high-speed serial interface

A configured Xcode environment

Working knowledge of Swift or C

iOS device (iPhone or iPad, iOS 10 or greater)

A CC2640R2 LaunchPad from Texas Instruments

This course leads students through the complete process of designing and building a Bluetooth-enabled iOS application that connects to an embedded ARM Cortex M3 micro-controller running a real- operating system. The embedded micro-controller is used to drive up to two strings of 60 RGB LEDs (120 LEDs maximum); the IOS application connects to the micro-controller to control the colour of the LEDs. An ambient light sensor provides the means to control the on/off state of the LEDs based on the light level.

The course avoids the use of pre-supplied libraries and drivers thus exposing students to deep detail on how the technology actually works. For iOS, using the Swift programming language, students design and implement a state-machine approach for the Bluetooth interface as a component of a model-view-controller (MVC) application architecture. The embedded micro-controller application is developed using the C programming language running on top of the TI-RTOS real- operating system. To design the LED driver code, students start with the LED data sheet and, from this, develop the requirements for the micro-controller's Synchronous Serial Interface (SSI) and Direct Memory Access (DMA) peripherals both of which are programmed at the register level. The ambient light sensor provides students with the opportunity to learn how the micro-controller's Analogue-to-Digital Converter (ADC) peripheral works and how it is programmed.

The course is appropriate for students with a basic understanding of C and Swift; students will need to have a functional iOS programming environment using Xcode.

iOS developers who want to learn about embedded system design

Embedded developers who want to skill up on mobile design and development

DOWNLOAD
uploadgig

rapidgator

nitroflare

Search

Search

The Complete Bluetooth™/IoT Design Course for iOS

LeeAndro

Trusted Editor